It’s quite surprising at the depth of the intricate work put inside a diamond band. The mounting on the diamond ring is extremely vital. It is essential to check that your mounting is secure. Check all of the prongs. They should be bent properly. When it’s angled it is necessary to verify the angle, and then make a divet. The prongs might become fragile if the grooves become too long. The craftsman must open up the prongs slightly. Sometimes, the setting may be too smaller than the settings. This can severely weekends the prongs. It’s commonplace for large diamonds to be placed in a smaller setting. Some settings are made for a one-size-fits-all. If the prongs are set too excessively high or low, the prongs can chip and the diamond might be thrown off. These are a few factors that you should be looking for when you are making your diamond ring. There are many other factors to think about. For additional tips and tricks you can watch this short video. qbkkghdh5w.